S8plus Replacement Screen From Digital Supply Usa Review

Samsung Milky way S8 Plus LCD Screen Replacement Guide

This guide will aid you through the more affordable option of replacing your own LCD screen for your Samsun Galaxy 8 Plus. For your convenience, Digital Supply USA has fix-made repair kits, including the glass. Shatter and fingerprint resistant, our replacement drinking glass is made from the highest quality ion-infused glass on the market and features an oleo-phobic blanket.*

Tools Y'all Will Need

• Blow dryer
• 90% isopropyl booze
• Cotton swab
• Credit cards or guitar picks
• Tweezers
• The Samsung Milky way S8 PLUS LCD Digitizer Drinking glass Screen repair tool kit from Digital Supply The states
• Shatter-resistant, fingerprint-resistant ion-infused, oleo-phobic glass screen
• LCD digitizer assembly
• Suction loving cup
• Opening pick
• Spudger
• Small Phillips screwdrivers
• 3M adhesive
• Instruction guide

Instructions

Footstep 1: Unplug, and so power downwards telephone. Remove SIM and SD cards.

Pace 2: Soften adhesive using accident dryer. Utilize low oestrus around edges of the back panel until warm to the touch.

Step 3: Press suction loving cup onto the panel every bit shut to the border without going over the curve to create a proper seal.

Footstep 4: Gently elevator suction cup. Insert opening pick along the side between the drinking glass and the back panel, where agglutinative is thinnest.

Step 5: Keep opening pick in place and run blow dryer on depression oestrus down the side border to loosen adhesive even more. (Focus oestrus on the back console, non into the side seam.) Insert spudger along the warmed seam, then slowly slide the blade down the length of the phone. Repeat for the other iii sides, inserting some other pick or a credit card into each seam to keep it open.

Footstep half-dozen: Using your fingers or edges of a card, carefully pry open the telephone about 35 degrees. Be sure fingerprint sensor cablevision that connects to the rear glass almost the main camera releases. If needed, use tweezers or the tip of spudger to disconnect it.

Footstep 7: Remove dorsum from phone.

Step eight: Use spudger to remove the finger print reader secured to the back of the panel.

Pace 9: Clean edges with a cotton swab dampened with 90% isopropyl alcohol. Advisedly remove any remaining agglutinative with tweezers.

Step 10: Using small Phillips head screwdriver, remove 15 3.7mm #000 screws.

Step eleven: With spudger, remove NFC antenna assembly and charging console.

Pace 12: Remove lower antenna associates that includes a single speaker.

Step 13: Using a flat pick or card, carefully disconnect the battery coil from the console, and then pry out battery.

Step 14: Disconnect other cables from light-green daughterboard with spudger and/or tweezers. Remove daughter lath.

Step 15: Remove five 3.7mm #000 screws.

Pace xvi: With tweezers, remove blueish daughterboard from the midframe. It includes the USB connector, headphone jack and primary microphone.

Footstep 17: Remove front-facing sensor array. It contains the condition LED, camera, proximity sensor and IR emitter.

Pace 18: Remove SA plus earpiece speaker, followed by spring-continued vibrator.

Step 19: Take out the book control and power cable.

Footstep 20: Turn over telephone. Use blow dryer to warm glass and loosen agglutinative.

Step 21: Adhere suction cup. Employ opening pick or card to remove drinking glass from phone. Employ additional heat every bit needed.

Step 22: Remove erstwhile adhesive with isopropyl booze, cotton swab and tweezers.

Step 23: Reapply agglutinative on front and back of telephone.

Step 24: Attach new glass screen.

Footstep 25: Repeat all previous steps backwards to reassemble telephone.

If you lot have a shattered screen on your Samsung Milky way 8 Plus, save yourself the shipping fees and repair it yourself with tools and instructions from Digital Supply U.s.a..

*Repair at your own run a risk.

andrewsthoubt.blogspot.com

Source: https://www.digitalsupplyusa.com/pages/samsung-galaxy-s8-plus-lcd-screen-replacement

Share this post